JSB392 Switch/Digital Input Module

The JSB392 USB Switch/Digital input module provides a single (1) input for connection to user devices like sensors, switches or other sources needing detection of digital input. The input sense a DC voltage switch point that can be read from the host PC over the USB port. Applications can monitor the state of a contact or switch closures. Standard module has high quality screw tpe terminal blocks. Single unit cost starts at $39.5 . JSB392 Switch/Digital Input Module
Features
* Digital,Switch or Sensor Input
* 5V available for sensor power (400mA)
* Monitor switch or contact closures
* Socket for optional switch input pull-up
* High quality screw type terminal blocks
* Optional RCA type connector
* High-Speed USB 2.0 device, USB 1.1 compatible
* Type B USB connector high-retention design
* All needed power drawn from USB port, no external power required for card
* Custom 32 and 64 bit Microsoft Windows drivers provided
* Info for linux and other OS support under software tab
Specifications
* Input
3.5V switch point
Reverse protection diodes
Contact factory for higher input ranges
* Fused output power
5V @ 400ma
* Pull-up
5 pin SIP socket for resistor pull-up
4.7K resistor pak installed as default
* RCA Connector only supports switch input (no 5V available)
* Self Powered from USB (high power Hub)
* Application notes
Detecting a contact closure AN 392-001 Monitor Contact Closure
* Videos
Detecting a contact closure Your Tube
* Additional Switch input modules
4-8 channel JSB394
16 channel JSB39616
4-8 channel debounce JSB396
1 channel JSB392
2 channel JSB391
*Operating Temperature: -20 to +70 C
*Storage Temperature: -40 to +105 C
*Humidity 5% to 90% RH, without condensation
Software
Most of our customers write their own program for controlling our devices. With our provided API's you can use any programming language that supports DLL so you do not have to learn a whole new language. We provide two types of DLL api, first is the older standard DLL with both mangled calls and "C" calls. The second is the managed Class Library that supports all the new managed languages. Any programming language that supports calls to Windows DLL can also be used to control the cards. The software interface is easy to use from Visual Basic, Visual C# Visual C++ via a standard windows DLL with sample source included. Linux driver support CD available. Each module has an unique serial number string which allows multiple USB boards to be controlled by the host USB controller as individual USB devices. Click on blue tabs above to view other information about the module.
Ordering
JSB392A-15 USB 1 Input switch/sensor Terminal Block Enter Qty
1-9 $39.5ea.
10- 49 $34ea.
50+ $30.5ea.
Add to Cart
JSB392A-15RCA USB 1 Input switch(15V) RCA Connector Enter Qty
1-9 $39.5ea.
10- 49 $34ea.
50+ $30.5ea.
Add to Cart
Sip05473 4.7K SIP resistor Enter Qty
1-9 $1.25ea.
10- 49 $1.15ea.
50+ $1ea.
Add to Cart
Sip05104 10K SIP resistor Enter Qty
1-9 $1.25ea.
10- 49 $1.15ea.
50+ $1ea.
Add to Cart
JSB392-Linux Linux Support (on standard CD) Enter Qty
1-9 $0ea.
10- 49 $0ea.
50+ $0ea.
Add to Cart
*Open Connector pdf file (printable)
JSB392 switch sensor Pinout Dwg
*Open Mechanical pdf file (printable)
JSB392 switch sensor Mechanical Dwg
*Open Interface pdf file (printable)
JSB392 switch sensor Circuit Dwg
jwControl Software Downloads
*Download jwControl CD V3.02 (14 Jun 2017) (zip file)
*Download Version History pdf (zip file)
This software replaces previous versions of module support software. It is a generic package that will provide support for all J-Works USB Modules. It is recommended that any new designs start with this package, and existing designs be moved over, if/when there is windows updates that require changes to the driver or API, the updates will only be made on jwControl CD. Also additional sample applications will be added to this CD only. There will be a larger number then normal revisions to this package, but most will not affect modules already supported, but is updates for modules not currently supported, or new samples. The Version History pdf outline changes
Labview Support
*Download Using Labview (pdf file)
Non-Windows OS Support (Linux and others)
*Download Using non-windows OS (pdf file)
Important readme about using dll with versions of windows .net Readme pdf
On some installations of Windows 7 and Windows 8 that are not configured to search the CD for drivers, it may show driver
not install and you need to do a manual install. If there is not yet a custom install under software downloads
you can download the pdf and zip of the generic install and copy your existing driver files from the CD, or do a manual install from PDF
Readme pdf
Generic install zip file
Before plugging module into the USB port, install driver as follows
1)Download jwControl software and exact from zip file
2)Run (double click) the batch file "DriverInstall.bat" in the top level of the software package
3)On some systems you may be asked if it is ok to run the program, click yes
4)On the welcome page dialog, click next to start install
5)When it completes done screen will be displayed, click finish
6)The module can now be plugged in, and green module led will come on
View Videos at Google+
J-Works,Inc
Email: sales@j-works.com
Solution Graphics

Page Last Updated Nov 20, 2015