|
J-Works Press Releases |
| 2008, Jul 15 | “USB 4 Channel 16 bit ADC with PGA” Model JSB-646 |
| The Model JSB-646 USB support 4 channel 16 bit ADC module with PGA gain of 1, 2, 4 or 8 and plugs ‘n plays into the standard USB (Universal Serial Bus). The user controls the ADC's from any programming or test language that supports USB communications as shown in sample applications. Screw type terminal block connectors allow quick wire hook-up to the relays. Ideal for Wheatstone bridge sensors and other low level sensors. Click here to view data sheet | |
| 2008, Jan 17 | “USB Control of 8 Amp Relays” Model JSB-293 |
| The Model JSB-293 USB relay module has a high current relays (8 amp) (DPDT) and plugs ‘n plays into the standard USB (Universal Serial Bus). The user controls the relays from any programming or test language that supports USB communications as shown in sample applications. Screw type terminal block connectors allow quick wire hook-up to the relays. Each relay contact is rated at 8 amp @ 125VAC Click here to view data sheet | |
| 2007, Oct 15 | “USB Control of 16 Amp Relays” Model JSB-283 |
| The Model JSB-283 USB relay module has a high current relays (16 amp) (DPDT) and plugs ‘n plays into the standard USB (Universal Serial Bus). The user controls the relays from any programming or test language that supports USB communications as shown in sample applications. Screw type terminal block connectors allow quick wire hook-up to the relays. Each relay contact is rated at 16 amp @ 125VAC Click here to view data sheet | |
| 2007, Mar 19 | “USB AC Monitor” Model JSB-370 |
| JSB-370 AC Monitor which monitors an AC line and reports the on/off status of the line over the standard USB. The user may select that an on-board relay turns on and off based on the status of the AC line. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications. Click here to view data sheet | |
| 2007, Jan 18 | Quadrature Counter USB Module Model JSB-524 |
| Click here to view data sheet | |
| 2006, Dec 5 | USB WatchDog Timer USB Module Model JSB-360 |
| Click here to view data sheet | |
| 2006, Oct 2 | “USB Control of 16 Amp Relays” Model JSB-281 |
| The Model JSB-281 USB relay module has a high current relays (16 amp) (SPDT) and plugs ‘n plays into the standard USB (Universal Serial Bus). The user controls the relays from any programming or test language that supports USB communications as shown in sample applications. Screw type terminal block connectors allow quick wire hook-up to the relays. Each relay contact is rated at 16 amp @ 125VAC Click here to view data sheet | |
| 2006, Sep 26 |
“USB Control of 48 High Side drivers” Model CSB-1472” |
| The Model CSB-1472 USB DIO module provides control of up to 48 High drivers from the standard USB (Universal Serial Bus). As shown in the sample applications the user can control the relay drivers from any programming or test language that supports USB communications. Two 50 pin connectors accepts ribbon cable that each can drive 24 relays. Ribbon cable pin-out supports the industry standard I/O (OPTO 22). Click here to view data sheet | |
| 2006, Aug 9 |
“USB Control of 48 Digital IO” Model CSB-1470” |
| The Model CSB-1470 USB DIO module provides 24 or 48 buffered drive digital input and outputs. Each line (I/O connection) can be configured to be either input or output. The bi-directional DIO bits gives the user a simple interface to monitor and control any number of I/O signals between your external hardware and the PC computer As shown in the sample applications the user can control the relay drivers from any programming or test language that supports USB communications. Two 50 pin connectors accepts ribbon cable that each can drive 24 relays. Ribbon cable pin-out supports the industry standard I/O (OPTO 22). Click here to view data sheet | |
| 2006, Jul 24 |
“USB Control of 48 relay drivers” Model CSB-1475” |
| The Model CSB-1475 USB DIO module provides control of up to 48 relay drivers from the standard USB (Universal Serial Bus). Each driver is a darlington sink driver that will handle up to 50V @ 150ma. As shown in the sample applications the user can control the relay drivers from any programming or test language that supports USB communications. Two 50 pin connectors accepts ribbon cable that each can drive 24 relays. Ribbon cable pin-out supports the industry standard I/O (OPTO 22). Click here to view data sheet | |
| 2005, May 14 | Reed Relay 1 Amp 8 to 16 relay USB Relay Module Model JSB-24x |
| click here to view data sheet | |
| 2005, Feb 10 | DPDT 2 Amp 8/16 Relay USB Module Model JSB-23x |
| click here to view data sheet | |
| 2005, Oct 25 | USB Temperature Measurement USB Module Model JSB-441 |
| Click here to view data sheet | |
| 2004, Sep 1 | USB Digital I/O Module (96 or 192 I/O) Model JSB-460 |
| Click here to view data sheet | |
| 2004, Jun 23 | Opto I/O USB Module Model JSB-32x |
| Click here to view data sheet | |
| 2003, Aug 19 | Opto Isolated 8/16 Input & 8/12 Relay Output USB Module Model JSB-336 |
| Click here to view data sheet | |
| 2002, Dec 20 |
“USB Control of 15 Amp Relays” Model JSB-280 |
| The Model JSB-280 USB relay module has 2 or 4 high current relays (15 amp) (SPST) and plugs ‘n plays into the standard USB (Universal Serial Bus). The user controls the relays from any programming or test language that supports USB communications as shown in sample applications. Screw type terminal block connectors allow quick wire hook-up to the relays. Each relay contact is rated at 15 amp @ 125VAC and 10 amp @ 30VDC. Click here to view data sheet | |
| 2003, Apr 6 | J-Works, Inc. introduces “USB Relay Module Model JSB-215” |
| The Model JSB-215 USB relay module has 8 or 16 “form C” relays (SPDT) and plugs ‘n plays into the standard USB (Universal Serial Bus). The user controls the relays from any programming language that supports USB communications. Terminal block connectors allow quick hook-up to three contacts per relay. Each relay contact is rated at 2 amp @ 30VDC. The module replaces internal pc based plug-in cards in various test, control and measurement applications. Click here to view data sheet | |
| 2002, Dec 13 | “USB relay output and opto-isolated input” Model JSB-340 |
| The Model JSB-340 USB opto provides four (4) 2 amp form ‘C’ relays (SPDT) and four (4) opto-isolated inputs that plugs ‘n plays into the standard USB (Universal Serial Bus). Inputs provide up to 2500V electrical isolation and selectable input ranges of 0 to 15V or 0 to 30V. As shown in the sample applications the user can control the relays and sample the input from any programming or test language that supports USB communications. Screw style terminal block connectors allow quick hook-up. The small form factor module has optical and relay isolation which eliminates surges present in industrial environments from effecting the host PC in various USB test, USB control, USB monitor and USB measurement applications. Click here to view data sheet | |
| 2001, Aug 3 |
J-Works, Inc. introduces “USB Relay Module” Model JSB-218 |
| The Model JSB-218 USB relay module has 1,2 or 4 “form C” relays (SPDT) and plugs ‘n plays into the standard USB (Universal Serial Bus). The user controls the relays from any programming language that supports USB communications (sample applications provided). Terminal block connectors allow quick hook-up to three contacts per relay. Each relay contact is rated at 2 amp @ 30VDC and 1 amp @ 120VAC. Click here to view data sheet | |
| 2000, Jan 4 | J-Works, Inc. introduces “USB Relay Module Model JSB-210” |
|
The Model JSB-210 USB relay module has 8 or 16 “form C” relays (SPDT) and plugs ‘n plays into the standard USB (Universal Serial Bus). The user controls the relays from any programming language that supports USB communications. Terminal block connectors allow quick hook-up to three contacts per relay. Each relay contact is rated at 1 amp @ 30VDC. The module replaces internal pc based plug-in cards in various test, control and measurement applications. Click here to view data sheet |
| J-Works,Inc |
| 11024 Balboa Blvd. #402 |
| Granada Hills, CA 91344 |
| 818 364-0915 voice 818 364-0912 fax |
| sales@j-works.com |
|
Web Site: www.j-works.com |